Powering Unmanned Vehicles: DC-DC Converters

  • Installation method of the machine shell
  • Installation with guide rail
  • Efficiency up to 90%
  • Maximum output power of 150W
  • Operating temperature range: -40℃ to +85℃
  • No-load power consumption, low radiation interference, ripple noise less than 1%Vo
  • High isolation withstand voltage of 1500V DC or 800V AC
  • Certified and designed to be environmentally friendly, compliant with RoHS directive.

Powering Unmanned Vehicles: DC-DC Converters

feature isolated and regulated single-output with an efficiency of up to 90%. These modules offer a high isolation voltage of 1500VDC and can operate in a wide temperature range from -40℃ to +85℃.

Additionally, they include input undervoltage protection, as well as output overvoltage, overcurrent, and short circuit protection. Widely used in robotics, drones, railway equipment, medical devices, industrial control, power systems, and telecommunications, these DC-DC power modules ensure reliable performance in demanding applications.

Products type

Note: the input range has 2:1 & 4:1 and has two packages, the one is case package and the other is DIN rail, the output voltage over the 48V will be special designed. Please tell us your request before order with thanks.

Input characteristics

input cjaracteristics

Output characteristics 

output characteristics

General characteristics

general characteristics

Product characteristics curve  

Temperature de-rating curve                                                                        Typical efficiency curve chart 

                                            

Typical Product Features  

Typical Ripple and Noise of 100W 24V Output                                                Typical Dynamic Response of 100W 24V Output

                                               

Product Wiring Diagram   

Application Circuit  

Note: If the input cable and output cable<= 2 meters in reality, no needto add the outside application according to the real use.

EMC solution – recommendation circuits   

Case Installation and pin definition      81.5 * 68* 17mm 

DIN Installation and pin definition       81.5*55.5*27.2mm

     Note: Unit: mm(inch)
     Terminal rated current: 24A
     Wire diameter: 22-14AWG (2.5mm2)
     Connector torque size: M3 screw, 0.5N.m
     Unstated tolerance: X.X±0.5mm(X.X ±0.02inch)

Isolated Installation and pin definition    81.5 * 68 * 20mm 

Size

 

     Note: Unit: mm(inch)
     Terminal rated current: 24A
     Wire diameter: 22-14AWG (2.5mm2)
     Connector torque size: M3 screw, 0.5N.m
     Unstated tolerance: X.X±0.5mm(X.X ±0.02inch)