We help the world since 2012
Toroidal Transformers Support
Toroidal Transformers – Frequently Asked Questions
This page provides technical support for Chonda’s toridal transformers. For urgent issues, contact engineers.
1. Q: Why is my toroidal transformer making a humming noise?
A: This is typically caused by loose mounting hardware or DC offset in your power supply. Tighten the center bolt with rubber washers and consider installing a DC blocker circuit.
2. Q: Can I mount a toroidal transformer vertically?
A: While possible, horizontal mounting is recommended for better heat dissipation. Ensure the mounting surface is completely flat.
3. Q: How do I determine the proper VA rating needed?
A: Calculate your device’s maximum current draw multiplied by its operating voltage, then add 20% safety margin. For example: 2A × 12V = 24VA → select a 30VA transformer.
4. Q: Why does my transformer get excessively hot?
A: Some warmth is normal, but if surface temperatures exceed 65°C (149°F), check for overload conditions, insufficient ventilation, or incorrect input voltage.
5. Q: Are toroidal transformers suitable for audio equipment?
A: Yes, their low electromagnetic interference makes them excellent for high-quality audio applications like amplifiers and preamps.
6. Q: What typically causes toroidal transformer failure?
A: Common causes include power surges, short circuits, moisture exposure, or sustained operation beyond rated capacity.
7. Q: Is it safe to stack multiple transformers?
A: We don’t recommend stacking as it can cause magnetic interference and overheating. Maintain at least 50mm spacing between units if needed.
8. Q: How do I connect a dual-secondary transformer?
A: For series connection: Link one secondary’s positive to the other’s negative. For parallel: Match positives to positives and negatives to negatives (only if windings are identical).
9. Q: Can I repair a burned-out transformer myself?
A: No, professional rewinding with special equipment is required. We recommend replacement or professional repair service.
10. Q: Will these work with DC power input?
A: No, toroidal transformers only operate with AC power. For DC applications, you’ll need a switching power supply.